Product Description
This unit offers incredible performance features while maintaining HydraMaster's reputation of building rugged reliable systems that are easy-to-use and simple-to-maintain.
Quality Designed and Built Throughout-- Combining years of truckmount building experience with the latest cleaning technology, HydraMaster again leads the industry with the Maxx™ Performance Series Truckmounts.
Specifications and Features--
*ADC™ Diverter Heat Control System--
The Maxx Performance Series uses an exclusive new heat system technology that controls temperature without dumping hot water into the waste tank. Coupling a thermostat to an actuator, temperature is controlled by opening and closing the stainless steel diverter valve. Solution temperature can be varied between 170°F to 250°F or turned off for flood restoration work.
*Engine--
Diesel 23.6 HP, Haihatsu Liquid Cooled, 3 cylinder, cast iron block
*Ignition--
Electric, key-start, electronic function, electronic governor
*Vacuum Blower--
Tuthill Pneumatics 4005X Tri-Lobe
-HydraMaster Exclusive, MD Pneumatics Tri-Lobe Design
-Pulsation and Sound Reduced
-No Grease Fittings, Oil bath at both ends
-Helical Gear Drive, Oil-Level Sight Windows
*Water Pump--
Cat Pump, 4.2 gpm, 1000 PSI operating pressure
*Chemical System--
High pressure injected, meter controlled, last-step
*Heating System--
-1 Stainless steel coil engine exhaust exchanger
-1 Copper shell and tube blower exhaust exchanger
-2 Engine coolant heat exchangers
*Instruments--
Water pressure gauge, liquid filled, 0-1500 PSI, Hour meter, machine runtime, Keyed ignition, start/stop, Chemical flow meter, diagnostic panel, Water temperature gauge, vacuum level gauge, Heat bypass lamp, overheat protection lamp, Overheat shutdown lamp, Diagnostic center
*Recovery Tank--
100 gallon aluminum, epoxy finish, Sloped bottom
*Cleaning Wand--
Stainless steel with heat shield, Replaceable grip, Rebuildable solution valve
*High Pressure Hose--
1/4" high temperature lined/vinyl covered, Hose rated to 2200 PSI working pressure
*Vacuum Hose--
2" Reinforced, 1-1/2" reinforced
*Frame--
24.5" W x 47.75" L x 37.38" H, Steel with baked on epoxy finish
Quality Designed and Built Throughout-- Combining years of truckmount building experience with the latest cleaning technology, HydraMaster again leads the industry with the Maxx™ Performance Series Truckmounts.
Specifications and Features--
*ADC™ Diverter Heat Control System--
The Maxx Performance Series uses an exclusive new heat system technology that controls temperature without dumping hot water into the waste tank. Coupling a thermostat to an actuator, temperature is controlled by opening and closing the stainless steel diverter valve. Solution temperature can be varied between 170°F to 250°F or turned off for flood restoration work.
*Engine--
Diesel 23.6 HP, Haihatsu Liquid Cooled, 3 cylinder, cast iron block
*Ignition--
Electric, key-start, electronic function, electronic governor
*Vacuum Blower--
Tuthill Pneumatics 4005X Tri-Lobe
-HydraMaster Exclusive, MD Pneumatics Tri-Lobe Design
-Pulsation and Sound Reduced
-No Grease Fittings, Oil bath at both ends
-Helical Gear Drive, Oil-Level Sight Windows
*Water Pump--
Cat Pump, 4.2 gpm, 1000 PSI operating pressure
*Chemical System--
High pressure injected, meter controlled, last-step
*Heating System--
-1 Stainless steel coil engine exhaust exchanger
-1 Copper shell and tube blower exhaust exchanger
-2 Engine coolant heat exchangers
*Instruments--
Water pressure gauge, liquid filled, 0-1500 PSI, Hour meter, machine runtime, Keyed ignition, start/stop, Chemical flow meter, diagnostic panel, Water temperature gauge, vacuum level gauge, Heat bypass lamp, overheat protection lamp, Overheat shutdown lamp, Diagnostic center
*Recovery Tank--
100 gallon aluminum, epoxy finish, Sloped bottom
*Cleaning Wand--
Stainless steel with heat shield, Replaceable grip, Rebuildable solution valve
*High Pressure Hose--
1/4" high temperature lined/vinyl covered, Hose rated to 2200 PSI working pressure
*Vacuum Hose--
2" Reinforced, 1-1/2" reinforced
*Frame--
24.5" W x 47.75" L x 37.38" H, Steel with baked on epoxy finish
